PAK HEAT, DRY HEAT BAGS

1.Components:

Water, active carbon, SALT, iron powder and vermiculite

2.Characteristics of the heat:

(by the J I S Japanese industrial standard thermometric method)

-Heat length above 40ºC: 24 hours.

-Average temperature: 51ºC.

-Maximum temperature: 65ºC.

3.Instructions for use:

-Tear the external plastic and take the internal bag out of it.

-Shake the bag until all the components are well mixed, so that the bag can activate.

-If the temperature goes down while you are using the bag, shake it again.

-After using it, throw it to the dustbin. It is not polluting.

4. Warnings:

-Use it only externally.

-Do not open the bag and do not let the contents put in touch with your mouth or eyes.

-In case it puts in touch, wash your mouth or eyes with abundant water. In case it is ingested unintentionally, cause the vomit and visit the doctor

-People who have the cutaneous sensitivity reduced should not use this product.

-Do not use it while you are sleeping because of the possibility to increase the temperature.

5. Immediate application:

Pak Heat relieves the pain and quickens the recovery of the traumatologic and rheumatologic diseases.

6. Function of each component:

Iron powder: it generates heat when it oxidizes.

Water: catalyst in the oxidation of the iron powder.

Salt: catalyst in the oxidation of the iron powder.

Active carbon: it helps in the oxidation speed.

Vermiculite: it contains water and works like water reserve.

Pak Heat is presented in the following way:

-12 hour and 24 hour therapeutic bags.

-Feet heater (5 hour heat. It contains 2 units).

-Hand heater (2 units. 12 hours heat each one).

For further information or any question:

Pak Heat BM, S.L. Plza. Azkoitia, 3 Bajo. 20.011 San Sebastián. Tfno: 943-46 28 11. Fax: 943-47 48 26

C.I.F.: B-20710729